Loadamateur69

While the yearly major macOS update system is free to install, it is still limited to Macs that Apple deems compatible, and every year a generation of Macs essentially becomes obsolete. This is despite the fact that Apple is eager to emphasize that macOS is a widely compatible operating system.

• Macos 10.15 Unsupported Macs
• Macos Mojave On Unsupported Mac

If you’re unsure what version of macOS you have, you can check your macOS or OS X version by clicking the Apple icon at the top-left corner of Mac’s screen, then select About This Mac. In the Overview tab, look at the Mac model year below the OS version number. Jun 16, 2021 Make your old Mac support macOS Catalina. Older Mac owners don’t have to worry. It’s not the end of the world. There’s a patch that lets you install Catalina to Macs that are not officially supported. The patch is known as DosDude Catalina Patcher. DosDude Catalina Patcher is a third-party tool, meaning Apple does not develop the tool. Step 1 How to install macOS Mojave on Unsupported Macs. Grab a copy of the Mojave Patch Tool at the link below: Make sure that your Mac is compatible (in 'Requirements') before you start.

As it happens, there are still people with close to ten-year-old Apple desktop computers still in use on a daily basis, likely performing a range of lighter tasks.

Download CleanMyMac X from MacPaw’s website and clean up to 500MB of junk data from your computer while enjoying all the features of the software without major limitations.

Which Macs Don't Support High Sierra

For some reason Apple doesn't want to allow these Macs to run one of its latest operating systems, namely macOS 10.13 High Sierra. This leaves the following Macs on macOS 10.11 El Capitan:

• MacBook Pro – late-2009 or earlier models
• MacBook – late-2008 or earlier models
• MacBook Air – 2009 or earlier models
• iMac – late-2008 or earlier models
• Mac Mini – 2009 or earlier models
• Mac Pro – 2009 or earlier models.

These machines are considered obsolete and vintage by Apple. The company defines vintage products as those that have not been manufactured for more than five years but less than seven years ago. Obsolete products are those discontinued more than seven years ago.

How To Install macOS High Sierra on Unsupported Macs

Though Apple doesn't support the above hardware officially, someone has thought about sharing the love for these older machines. A developer known as DOSDude1 has written a patch that works on Macs with the Penryn architecture. Using this still imposes certain limitations, but at least makes it possible to install macOS High Sierra on the following Macs:

• Early-2008 or newer Mac Pro, iMac, or MacBook Pro (MacPro 3,1 and 4,1, iMac 8,1 and 9,1, MacBook Pro 4,1, 5,1, 5,2, 5,3, 5,4, and 5,5).
• Late-2008 or newer MacBook Air or Aluminum Unibody MacBook (MacBook Air 2,1, MacBook 5,1).
• Early-2009 or newer Mac Mini or white MacBook (Mac Mini 3,1, MacBook 5,2)
• Early-2008 or newer Xserve (Xserve 2,1, Xserve 3,1).

If you happen to own any of the Penryn Macs mentioned above, the macOS High Sierra Patch Tool written by DOSDude1 will make running the latest software possible. But remember, with High Sierra you will also migrate to the Apple File System, and it is highly recommended that you first disable SIP because it may prevent the patch from working at all.

Installing the operating system on any of these Macs will require some technical knowledge, so it is not recommended for novice users. Also, a backup of your data is always a good idea in case anything goes wrong.

While there is a full step-by-step tutorial and video tutorial available on DOSDude1's website, it’s good to get a summary of the basics, which start with downloading the macOS High Sierra Installer app from the Mac App Store:

1. Format a USB drive as Mac OS Extended (Journaled) via Disk Utility.
2. Open the macOS High Sierra Patcher tool, navigate to the High Sierra Installer App, then select your pen drive and click “Start Operation”.
3. Boot from the USB drive by holding down the option key after reboot.
4. Install macOS normally, reboot back on the installer drive, and then open the “macOS Post Install” application.
5. From the options, select the Mac model you own. This step is important, because it contains the optimal patch for that specific model.
6. Click the “Patch” button, and after the process has finished, click “Reboot”.

The Reason Not To Install macOS High Sierra on an Unsupported Mac

As you may have already experienced with other types of officially unsupported machines, the probability of having issues is much higher. The same applies in this case, too, since the macOS High Sierra Patcher will render your iMac 8.1 Broadcom Wi-Fi chip useless for certain models.

Macs that use the Broadcom BCM4321 Wi-Fi module will not have functional Wi-Fi when running High Sierra. Another issue that has been highlighted by the developer is that the trackpad in the MacBook 5,2 isn't fully supported in this version of OS.

These are just a few of the possible issues that could arise, and this is before even mentioning the various potential software errors that you can run into by using out-of-date hardware. Without getting the proper knowledge beforehand, you'll need to revert back to the previous state of the Mac, which won't be an easy process, especially not without a Time Machine backup.

Best Mac Optimization Software of 2021

Rank	Company	Info	Visit
	User-friendly client Deep, effective cleaning options Versatile, user-oriented customer support 30-day money back guarantee Full review…
	Personalized, remote assistance Unique optimization tools Anti-theft tracking Built-in antivirus Full review…
	Fast scanning User-friendly UI Virus and malware scan Great cleaning features Full review…

Get the Best Deals on Mac Optimization Software

Stay up to date on the latest tech news and discounts on Mac optimization software with our monthly newsletter.

This advisory describes the changes and steps administrators can take to deploy Mac Connector 1.14.

May 07, 2020 How to Install macOS Catalina on Unsupported Mac; With these much problems that are for Mac users, Windows users might not even think of getting Mac or MacOS somehow. But that’s not true. With all those problems, there’s still some workaround in the underground to make it work. That is install macOS Mojave on Windows.

1. How to keep older Macs secure: a geeky approach (run Catalina on unsupported Macs) Posted on October 8th, 2019 by Jay Vrijenhoek. Note: This article was originally written for macOS Mojave, and has been adapted for macOS Catalina. From a security standpoint, using the latest version of macOS—the Mac operating system—is always preferred.
2. Allow the installation to proceed and the relevant patches will be applied to your unsupported Mac automatically. Apple could always release a future update to macOS 10.15 that prevents the.

Mac Connector version 1.14 introduces a number of changes that require user attention. Most notably, this Connector release includes changes to full disk access approvals and adds support for macOS 11 (Big Sur) System Extensions.
Since the inital 1.14 launch, compatibility issues have been discovered with 3rd party applications on macOS 10.15 Catalina when system extensions are in use. Apple will be addressing these issues in future releases of macOS 11 but will not be fixing these issues in macOS 10.15. Consequently, starting with version 1.14.1, the Mac Connector will use legacy kernel extensions instead of system extensions on all versions of macOS 10.15.
Mac Connector 1.14 is required to ensure endpoint protection on macOS 11. Older Mac Connectors will not work on this version of macOS.
It is highly recommended to deploy the Mac Connector with an MDM profile that grants the required approvals. MDM profiles must be installed before installing or upgrading the Mac Connector to ensure the needed permissions are recognized. Refer to the Known Issues section later in this document if MDM cannot be used.

Minimum OS Requirements

AMP for Endpoints Mac Connector 1.14.0 supports the following macOS versions:

• macOS 11, using macOS system extensions.
• macOS 10.15.5 and later, using macOS system extensions.
• macOS 10.15.0 through macOS 10.15.4, using macOS kernel extensions
• macOS 10.14, using macOS kernel extensions.

AMP for Endpoints Mac Connector 1.14.1 supports the following macOS versions:

• macOS 11, using macOS system extensions.
• macOS 10.15 using macOS kernel extensions.
• macOS 10.14, using macOS kernel extensions.

For deployments that include endpoints running older macOS versions, consult the OS Compatibility Table for compatible Mac Connector versions.

Important Changes

Mac Connector 1.14 introduces important changes in three areas:

1. Approving AMP macOS Extensions to load
2. Full Disk Access
3. New Directory Structure

Approving Mac Connector macOS Extensions

The Mac Connector uses either System Extensions or legacy Kernel Extensions to monitor system activities, depending on the macOS version. On macOS 11, System Extensions replace the legacy Kernel Extensions that are unsupported in macOS 11. User approval is required on all versions of macOS before either type of extension is allowed to run. Without approval, certain Connector functions such as on-access file scan and network access monitoring will be unavailable.

Mac Connector 1.14 introduces two new macOS system extensions:

1. An Endpoint Security extension, named AMP Security Extension, to monitor system events
2. A Network Content Filter extension, named AMP Network Extension, to monitor network access

The two legacy Kernel Extensions, ampfileop.kext and ampnetworkflow.kext, are included for backwards compatibility on older macOS versions that don't support the new macOS System Extensions.

The following approvals are required for macOS 11** and later:

• Approve AMP Security Extension to load
• Approve AMP Network Extension to load
• Allow AMP Network Extension to filter network content

** Mac Connector version 1.14.0 also required these approvals on macOS 10.15. These approvals are no longer required on macOS 10.15 when running Mac Connector 1.14.1 or later.

The following approvals are required for macOS 10.14 and macOS 10.15:

Install Macos Mojave On Unsupported Mac

• Approve AMP Kernel Extensions to load

These approvals can be granted using the macOS Security & Privacy Preferences on the endpoint, or by using Mobile Device Management (MDM) profiles.

Approving Mac Connector macOS Extensions at the Endpoint

System and Kernel extensions can be approved manually from the macOS Security & Privacy Preferences pane.

Approving Mac Connector macOS Extensions using MDM

NOTE: macOS Extensions cannot be retroactively approved via MDM. If the MDM profile is not deployed prior to installing the Connector then the approvals will not be granted and additional intervention will be required in one of the following forms:

1. Manual approval of the macOS Extensions on endpoints that had the management profile deployed retroactively.
2. Upgrading the Mac Connector to a newer version than the one currently deployed. Endpoints that had themanagement profile deployed retroactively will recognize the management profile after upgrade and gain approval once the upgrade completes.

AMP extensions can be approved using a management profile with the following payloads and properties:

Payload	Property	Value
SystemExtensions	AllowedSystemExtensions	com.cisco.endpoint.svc.securityextension, com.cisco.endpoint.svc.networkextension
	AllowedSystemExtensionTypes	EndpointSecurityExtension, NetworkExtension
	AllowedTeamIdentifiers	DE8Y96K9QP
SystemPolicyKernelExtensions	AllowedKernelExtensions	com.cisco.amp.fileop, com.cisco.amp.nke
	AllowedTeamIdentifiers	TDNYQP7VRK
WebContentFilter	AutoFilterEnabled	false
	FilterDataProviderBundleIdentifier	com.cisco.endpoint.svc.networkextension
	FilterDataProviderDesignatedRequirement	anchor apple generic and identifier 'com.cisco.endpoint.svc.networkextension' and (certificate leaf[field.1.2.840.113635.100.6.1.9] /* exists */ or certificate 1[field.1.2.840.113635.100.6.2.6] /* exists */ and certificate leaf[field.1.2.840.113635.100.6.1.13] /* exists */ and certificate leaf[subject.OU] = DE8Y96K9QP)
	FilterGrade	firewall
	FilterBrowsers	false
	FilterPackets	false
	FilterSockets	true
	PluginBundleID	com.cisco.endpoint.svc
	UserDefinedName	AMP Network Extension

Full Disk Access

MacOS 10.14 and later require approval before an application can access parts of the filesystem that contain personal user data (e.g. Contacts, Photos, Calendar, and other applications). Certain Connector functions such as on-access file scan will be unable to scan these files for threats without approval.

Previous Mac Connector versions required the user to grant Full Disk Access to the ampdaemon program. Mac Connector 1.14 requires Full Disk Access for:

• 'AMP for Endpoints Service' and
• 'AMP Security Extension'

The ampdaemon program no longer requires Full Disk Access starting with this new Mac Connector version.

Full Disk Access approvals can be granted using the macOS Security & Privacy Preferences on the endpoint, or by using Mobile Device Management (MDM) profiles.

Approving Full Disk Access at the Endpoint

Full Disk Access can be approved manually from the macOS Security & Privacy Preferences pane.

Approving Full Disk Access Using MDM

NOTE: macOS Extensions cannot be retroactively approved via MDM. If the MDM profile is not deployed prior to installing the Connector then the approvals will not be granted and additional intervention will be required in one of the following forms:

1. Manual approval of the macOS Extensions on endpoints that had the management profile deployed retroactively.
2. Upgrading the Mac Connector to a newer version than the one currently deployed. Endpoints that had the management profile deployed retroactively will recognize the management profile after upgrade and gain approval once the upgrade completes.

Full Disk Access can be approved using a management profile's Privacy Preferences Policy Control payload with a SystemPolicyAllFiles property with the following two entries, one for the AMP for Endpoints Service and one for the AMP Security Extension:

Description	Property	Value
AMP for Endpoints Service	Allowed	true
	CodeRequirement	anchor apple generic and identifier 'com.cisco.endpoint.svc' and (certificate leaf[field.1.2.840.113635.100.6.1.9] /* exists */ or certificate 1[field.1.2.840.113635.100.6.2.6] /* exists */ and certificate leaf[field.1.2.840.113635.100.6.1.13] /* exists */ and certificate leaf[subject.OU] = DE8Y96K9QP)
	Identifier	com.cisco.endpoint.svc
	IdentifierType	bundleID
AMP Security Extension	Allowed	true
	CodeRequirement	anchor apple generic and identifier 'com.cisco.endpoint.svc.securityextension' and (certificate leaf[field.1.2.840.113635.100.6.1.9] /* exists */ or certificate 1[field.1.2.840.113635.100.6.2.6] /* exists */ and certificate leaf[field.1.2.840.113635.100.6.1.13] /* exists */ and certificate leaf[subject.OU] = DE8Y96K9QP)
	Identifier	com.cisco.endpoint.svc.securityextension
	IdentifierType	bundleID

If your deployment includes computers running AMP Connector version 1.12.7 or older, the following additional entry is still required to grant full disk access to ampdaemon for those computers:

Description	Property	Value
ampdaemon	Allowed	true
	CodeRequirement	identifier ampdaemon and anchor apple generic and certificate 1[field.1.2.840.113635.100.6.2.6] /* exists */ and certificate leaf[field.1.2.840.113635.100.6.1.13] /* exists */ and certificate leaf[subject.OU] = TDNYQP7VRK
	Identifier	/opt/cisco/amp/ampdaemon
	IdentifierType	path

New Directory Structure

Mac Connector 1.14 introduces two changes to the directory structure:

1. The Applications directory has been renamed from Cisco AMP to Cisco AMP for Endpoints.
2. The command-line utility ampcli has been moved from /opt/cisco/amp to /Applications/Cisco AMP for Endpoints/AMP for Endpoints Connector.app/Contents/MacOS. The directory /opt/cisco/amp contains a symlink to the ampcli program at its new location.

The complete directory structure for the new AMP Connector is as follows:

Known Issues with macOS 11.0 and Mac Connector 1.14.1.

• Guidance for fault 10, 'Reboot required to load kernel module or system extension,' may be incorrect if four or more Network Content Filters are installed on the computer. Refer to the AMP For Endpoints Mac Connector Faults article for more details.

Known Issues with macOS 10.15/11.0 and Mac Connector 1.14.0.

• Some faults raised by the Mac Connector may be raised unexpectedly. Refer to the AMP For Endpoints Mac Connector Faults article for more details.
  • Fault 13, Too many Network Content Filter system extensions, may be raised after upgrading. Rebooting the computer will resolve the fault in this situation.
  • Fault 15, System Extension requires Full Disk Access, may be raised after reboot due to a bug in macOS 11.0.0. This issue is fixed in macOS 11.0.1. The fault can be resolved by re-granting full disk access in the Security & Privacy pane in macOS System Preferences.
    
• During installation, the Security & Privacy pane may display 'Placeholder Developer' as the application name when granting permission for the Mac Connector system extensions to run. This is due to a bug in macOS 10.15. Check the boxes beside 'Placeholder Developer' to allow the Mac Connector to protect the computer.
  
  • The systemextensionsctl listcommand can be used to determine which system extensions are awaiting approval. System extensions with the state [activated waiting for user]in this output are displayed as 'Placeholder Developer' in the macOS preferences page shown above. If more than two 'Placeholder Developer' entries are showin in the above preferences page, uninstall all software that uses system extensions (including the Mac Connector) so that no system extensions are awaiting approval, and then reinstall the Mac Connector.
    The Mac Connector sysem extensions are identified as follows:
    
    • The Network Extension is shown as com.cisco.endpoint.svc.networkextension.
    • The Endpoint Security extension is shown has com.cisco.endpoint.svc.securityextension.
      
• During install, the prompt to allow the Mac Connector's Content Filter to monitor network traffic may display '(null)' as the application name. This is caused by a bug in macOS 10.15. The user needs to select 'Allow' to to ensure protection of the computer.
  If the prompt was dismissed by clicking 'Don't Allow' it can be displayed again by clicking the AMP Agent menulet icon in the menu bar and selecting 'Allow Network Filter.'
  Once enabled, the AMP Network Extension filter will be listed in the Network Preferences page.
  
• On macOS 11, when upgrading from Mac Connector 1.12 to Mac Connector 1.14, Fault 4, System Extension Failed to Load, may be raised temporarily while the Connector is transitioning from the kernel extensions to the new system extensions.

Revision History

Dec 1, 2020

• Mac Connector 1.14.1 no longer uses system extensions on macOS 10.15.
• Additional guidance on using terminal check which 'Placeholder Developer' System Extensions are awaiting approval when using Mac Connector 1.14.0.

Nov 9, 2020

• Corrected bundle ID in full disk access CodeRequirement MDM payload.

Nov 3, 2020

Macos 10.15 Unsupported Macs

• Release date for 1.14.0 Mac Connector is November 2020.
• The 1.14.0 Mac Connector will use System Extensions starting with macOS 10.15.5. Previously this was 10.15.6.
• Added Known Issues section.
• Updated directory structure outline.

Carbon Copy Cloner requires macOS. CCC will not run on Windows.

Carbon Copy Cloner 5 is the latest version available. Users running Yosemite (10.10), El Capitan (10.11), Sierra (10.12), High Sierra (10.13), Mojave (10.14), or Catalina (10.15) should use this version of CCC. If you are having trouble downloading CCC from the link above, try this alternate download location.

Upgrading from CCC 4? CCC 5 is a paid upgrade. CCC 4 Personal and Household licenses purchased prior to May 22, 2017 are eligible for upgrade pricing. When you open CCC 5, it will automatically retrieve your new license or an upgrade coupon that you can use to purchase CCC 5 at 50% off. CCC 4 licenses purchased on or after May 22, 2017 are eligible for a free CCC 5 upgrade license.

CCC 5: Support for macOS 11 Big Sur

CCC 5.1.22 (and later) is qualified for macOS 11 Big Sur. Open CCC and choose 'Check for updates..' from the Carbon Copy Cloner to get the update, or click the 'Download CCC 5' button above. Please take a moment to review the following resources prior to upgrading to macOS Big Sur:

Macos Mojave On Unsupported Mac

Carbon Copy Cloner 4.1.24 is compatible with Mountain Lion (10.8), Mavericks (10.9), Yosemite (10.10), El Capitan(10.11), Sierra (10.12) and High Sierra (10.13). Note that while this version of CCC may work on El Capitan and newer OSes, we recommend that El Capitan+ users upgrade to CCC 5. We offer technical support for CCC 4, but we are no longer actively developing it. If you are having trouble downloading CCC from the link above, try this alternate download location.

Install Macos Mojave On Unsupported Mac

CCC 4 and Mojave+: CCC 4 is qualified up to macOS High Sierra. CCC 4 license holders are welcome to continue using CCC 4 on later OSes with the understanding that this is an untested and unsupported configuration. CCC 5 is fully qualified on macOS Mojave and offers extensive support for APFS, including support for point-in-time restores via APFS filesystem snapshots.

Install Macos Mojave On Unsupported Macs

Unsupported Versions

Macos 10.14 Mojave On Unsupported Macs Thread

Download CCC 3.5.7 for use on Snow Leopard (10.6) and Lion (10.7). Download CCC 3.4.7 for use on Tiger (10.4) and Leopard (10.5). CCC 3.4.7 and 3.5.7 are provided as-is; we regret that we cannot offer any support for the installation or use of these older versions of CCC.

Macos Mojave On Unsupported Mac

If you’re using macOS Mojave or later, choose Apple menu System Preferences, then click Software Update. If you’re using an earlier macOS, use the App Store instead. Learn how to download and install macOS Big Sur Go to the App Store. Upgrade os x mojave. Feb 05, 2021 macOS Mojave 10.14 can upgrade High Sierra, Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion macOS High Sierra 10.13 can upgrade Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion Safari downloads the following older installers as a disk image named InstallOS.dmg or InstallMacOSX.dmg.